Stainless steel camlock coupling Part DP

Standard: A-A-59326 (superseding MIL-C-27487) or DIN 2828.
Material: SS316 or SS304
Sizes: From 1/2″ to 6″
Types: A, B, C, D, E, F, DC, DP
Cam levers: stainless steel or brass handles
Pins, Rings and Safety clips: We use stainless steel or steel plated Pins, Rings and Safety clips.
Seal: NBR
Threads: NPT/ BSP

The cams at the end of each lever on the female end align with a circumferential groove on the male end. When the levers are rotated to the locked position, they pull the male end into the female socket, creating a tight seal against a gasket within the female socket. The arms lock into position using over-center geometry, preventing accidental decoupling. Further, lever safety pins are common features for additional security, and female-end “self-locking” levers are also available. Because the groove is cut all the way around the male end, there is no specific rotational alignment necessary to couple, as there would be with threaded connectors, and there is no opportunity for cross-threading. This results in a fast, error-resistant coupling operation. Because the compression between the two fittings is limited by the size of the cams on the end of the levers and the rotation of the levers themselves, there is also no possibility of over- or under-tightening the fitting; the pressure against the sealing gasket is effectively constant from one coupling operation to the next, reducing possibility of leaks.

Camlock coupling supplier |Stainless steel camlock coupling| Camlock fitting DP type |China camlock coupling

Stainless steel camlock coupling Part DP